IMHSS03 液壓伺服模塊是 INFI 90? 系統中用于控制渦輪機轉速的閥門位置控制模塊。它將伺服閥或 I/H 轉換器連接到 IMMFP01、IMMFP02 或 IMMFP03 多功能處理器模塊。

多功能處理器 （MFP） 模塊通過向液壓伺服 （HSS） 模塊發送位置要求來控制蒸汽或燃?xì)廨啓C(jī)節流閥的位置。HSS 模塊驅動其輸出以打開或關閉節流閥，以滿足位置需求。

多功能數碼復合機模塊使用IMFCS01頻率計數器模塊來測量渦輪機轉速。頻率計數器模塊通過計算和定時來自渦輪軸上磁性拾音器的脈沖來測量渦輪速度。多功能數碼復合機模塊使用此計數來計算渦輪機轉速，并根據設定點計算新需求。多功能處理器(MFP) 模塊通過向液壓伺服 (HSS) 模塊發送位置要求來控制蒸汽或燃?xì)廨啓C(jī)節流閥的位置。HSS 模塊驅動其輸出以打開或關閉節流閥，以滿足位置需求。

IMHSS03

多功能數碼復合機模塊使用IMFCS01頻率計數器模塊來測量渦輪機轉速。頻率計數器模塊通過計算和定時來自渦輪軸
上磁性拾音器的脈沖來測量渦輪速度。多功能數碼復合機模塊使用此計數來計算渦輪機轉速，并根據設定點計算新需求。
該應用說明了 PLC 用戶開始采用基于 PLC 的控制系統架構是多么簡單，”ABB 自動化產品部機械控制和自動化產品經理 Knud Jansen 說?！癗TK 的關鍵驅動因素是使用高級結構化文本語言進行編程的能力，以及強大的代碼分析器工具——這為公司的軟件開發人員在開發和測試 PLC 代碼模塊時提供了即時反饋?！?br /> NTK 的 PLC 起重機控制系統安裝在位于駕駛室內的受保護機柜中。然而，PLC 同樣可以在“***條件”變體中提供，允許用戶配置功能 PLC 解決方案，這些解決方案也***，適合在惡劣條件和***氣候下運行——這在一些起重機和絞車應用中很常見例如。

IMHSS03

The IMHSS03 hydraulic servo module is a valve position control module for controlling turbine speed in the INFI 90? system. It connects the servo valve or I/H converter to the IMMFP01, IMMFP02 or IMMFP03 multifunctional processor module.

The Multi-function processor (MFP) module controls the position of the steam or gas turbine throttle by sending position requirements to the hydraulic servo (HSS) module. The HSS module drives its output to open or close the throttle to meet the position requirements.

The multifunctional digital composite module uses the IMFCS01 frequency counter module to measure turbine speed. The frequency counter module measures turbine speed by counting and timing pulses from magnetic pickups on the turbine shaft. The multifunctional digital composite module uses this count to calculate turbine speed and calculate new requirements based on set points. The Multi-function processor (MFP) module controls the position of the steam or gas turbine throttle by sending position requirements to the hydraulic servo (HSS) module. The HSS module drives its output to open or close the throttle to meet the position requirements.

The multifunctional digital composite module uses the IMFCS01 frequency counter module to measure turbine speed. The frequency counter module is calculated and timed from the vortex shaft
Pulse on magnetic pickup to measure turbine speed. The multifunctional digital composite module uses this count to calculate turbine speed and calculate new requirements based on set points.
This application illustrates how easy it is for PLC users to start adopting PLC-based control system architectures, “said Knud Jansen, Product Manager, Machine Control and Automation, ABB Automation Products. “The key drivers of NTK are the ability to program in a high-level structured text language, as well as powerful code analyzer tools – which provide the company’s software developers with immediate feedback as they develop and test PLC code modules.”
NTK’s PLC crane control system is installed in a protected cabinet located in the cab. However, PLCS are equally available in “best conditions” variants, allowing users to configure functional PLC solutions that are also best suited to operate in harsh conditions and best climates – this is common in some crane and winch applications, for example.

IMHSS03