1771-IFMS 模擬輸入模塊 與PLC5處理器兼容

Allen-Bradley 1771- ifms是一個模擬輸入模塊，是1771產品公告的一部分。該模塊與PLC5處理器兼容，具有8個輸入通道。該模塊是一個本質安全，快速毫伏輸入模塊。

1771-IFMS接受0-50 mV的輸入電壓信號，分辨率為12位二進制。當在25攝氏度下工作時，它的精度為0.1%。線性度+/- 1 LSB，重復性+/- 1 LSB，輸入電壓保護32V。該模塊被設計為在+/- 10VDC的最大輸入電壓范圍下工作。

這個模擬輸入模塊帶有一個內部模擬到數字轉換器，使用單調輸出，沒有丟失的代碼。它具有14.5 ms的內部掃描速率為八(8)差分輸入沒有數字濾波。

當將輸入設備連接到1771-IFMS時，端接到模塊的1771-WG接線擺臂的適當導線尺寸為0.25…2.5 mm2(22…14 AWG)實心或絞合銅線直徑，絕緣等級為75°C(167°F)或更高，最大絕緣為1.2 mm(3/64英寸)。合適的導線扭矩為0.8 ~ 1.0 Nm (7 ~ 9 lb-in)。

請勿在PLC5系統有電狀態下安裝本模塊。它不支持在電源下(RIUP)拆卸和插入。另外，請注意正確的操作方法，防止靜電對模塊造成損壞。

1771-IFMS模塊的輸入分辨率為12位二進制。精確度為25攝氏度范圍的0.1%。線性度和重復性均為+/-1 LSB。輸入過壓保護額定值為32v。模塊輸入阻抗為1兆歐。共模抑制是100db(在60赫茲)。1771-IFMS模塊的背板電流在+5伏直流時為0.75安培。與1771-IFMS模塊兼容的接線臂是1771-WG?，F(xiàn)場配線臂螺釘扭矩推薦范圍為0.8 ~ 1.0 N-m。1771-IFMS模塊外殼為開放式，符合北美T6溫度規范。工作溫度范圍為0 ~ 60℃。相對濕度:5% ~ 95%，無冷凝。1771-IFMS模塊的非工作和工作沖擊額定值分別為30g和15g。連接到非本質安全側的設備不得產生或使用大于250伏有效值的電壓

1771-IFMS 模擬輸入模塊 與PLC5處理器兼容

Allen-Bradley 1771-IFMS is an analog input module that is part of the 1771 Product announcement. The module is compatible with PLC5 processors and has 8 input channels. The module is an intrinsically safe, fast millivolt input module.

The 1771-IFMS accepts input voltage signals from 0 to 50 mV with a resolution of 12 bits binary. When operating at 25 degrees Celsius, it has an accuracy of 0.1%. Linearity +/ -1 LSB, repeatability +/ -1 LSB, input voltage protection 32V. The module is designed to operate in a maximum input voltage range of +/- 10VDC.

This analog input module comes with an internal analog to digital converter that uses a monotonic output with no lost code. It has an internal scan rate of 14.5 ms for eight (8) differential inputs without digital filtering.

When the input device is connected to the 1771-IFMS, the appropriate wire size for the 1771-WG wire swing arm terminating to the module is 0.25… 2.5mm2 (22… 14 AWG) Solid or stranded copper wire diameter with an insulation class of 75°C(167°F) or higher with a maximum insulation of 1.2 mm(3/64 inch). The appropriate wire torque is 0.8 to 1.0 Nm (7 to 9 lb-in).

Do not install this module when the PLC5 system is powered on. It does not support disassembly and insertion under power supply (RIUP). In addition, pay attention to correct operations to prevent damage to the module caused by static electricity.

The input resolution of the 1771-IFMS module is 12 bits binary. The accuracy is 0.1% of the range of 25 degrees Celsius. Both linearity and repeatability are +/-1 LSB. The input overvoltage protection rating is 32v. Module input impedance is 1 megohm. The common mode rejection is 100db(at 60 Hz). The backplane current of the 1771-IFMS module is 0.75 amps at +5 volts DC. The connection arm compatible with the 1771-IFMS module is the 1771-WG. The recommended torque range of the screws for the onsite distribution arm is 0.8 to 1.0 N-m. The 1771-IFMS module housing is open and complies with the North American T6 temperature specification. Operating temperature range is 0 ~ 60℃. Relative humidity :5% ~ 95%, no condensation. The 1771-IFMS module has non-operating and operating shock ratings of 30g and 15g, respectively. Devices connected to non-intrinsically-safe sides must not generate or use voltages greater than 250 volts RMS

其他型號推薦：