Yokogawa橫河 CP451-10 CPU 處理器模塊，由功能塊和輸/輸出組成的小型控制組將在控制圖中進行描述，CP451-10 CPU 處理器模塊通過將過程設備控制統一為控制圖，可以簡化工程和維護工作。CP451-10 CPU 處理器模塊監控整個工廠或每過程也可以指定為控制圖，而不是指定不司設備之間的單個過程單元或功能。
CP451-10 CPU 處理器模塊下面描述控制圖的特征
連接I/0 和控制塊 通過在/0 和功能塊之間或功能塊之間連接一條線，可以可視化數據流定義
1、定義控制塊實現的順序 可以在控制圖中描述的幾個功能塊中確定實現優先級或執行順序
2、調節控制和順序控制的混合調節控制和順序控制可以在控制圖中混合?？刂乒δ芸筛鶕に囈箪`活配置
3、控制圖之間的自由信號流 屬于不同控制圖的功能塊可以連接到另一個控制圖。
Yokogawa橫河 CP451-10 CPU 處理器模塊:
CP451-10 1/0 模塊和現場設備之間的接線可使用三種連接方式
CP451-10 CPU 處理器模塊專用信號電纜連接、壓力端子連接和 MIL 電纜連接CP451-10 對于專用信號電纜連接，專用信號電纜用于通過端子板或繼電器板連接現場設備。信號電纜接口適配器在結構上與CP451-10 /0 模塊集成在一起通過分別選擇 /0 模塊和信號電纜的選項代碼，可以防止錯誤類型的 I/O 模塊插入。至于壓力端子連接，現場設備可以直接連接到 / 模塊。
橫河Yokogawa (P451-10 /0 模塊有兩種類型的壓力接線端子可供選擇一種是單配置類型，另一種是雙幾余配置類型。VO 模塊可以在端子塊上實現雙冗余
客戶提供的 MIL 電纜可以直接連接到 /0 模塊，無需接線端子。為防 ML 電纜從 /0 模塊斷開，電纜連接蓋(SCCC01 和 SCCC02)可與MIL 電纜一起使用。

CP451-10

CP451-10 Yokogawa橫河 處理器模塊
CP451-10 Yokogawa橫河 處理器模塊是整個CPU的命今控制中心，由指令寄存器IRlnstruction Register)、指令解碼器D(nstruction Decoder)、操作控制器0COperationcontroler)等組成，保持整個電腦的正常運行是很重要的。它根據用戶預先編好的程序，依次以存儲器中取出每條指令，放入指今客存器IR中，通過指令解碼(分析)確定需要執行什么操作，然后通過操作控制器OC，按照確定的時間順序，向相應的部件發出微操作控制信號。操作控制器OC主要包括節拍脈沖發生器、控制矩陣、時鐘脈沖發生器、復位電路和斷電電路控制邏輯運算器
是計算機的核心。您可以執行算術運算(包括基本運算，如加減乘數及其附加運算)和邏輯運算(包括移位、邏輯測試或兩個值的比)。相對于控制單元來說，計算機接受控制單元的命今并執行動作，即算術單元所執行的一切操作都是由控制單元發出的控制信號來指揮的，因此它是執行部件，存儲單元
這些包括芯片內緩存和寄存器庫，它們是CPU中等待處理或已經處理的數據的臨時存儲。CPU訪問存器的時間比訪問內存的時間要少。寄存器的使用可以減少CPU訪問內存的次數，從而提高CPU的工作速度，然而，由于芯片面積和集成度的限制，寄存器庫的容量不能很大。寄存器組可分為特殊寄存器和一般存器。專用存器的功能是固定的，分別存放相應的數據，另一方面，通用寄存器是通用的，可以由程序員指定，通用寄存器的數量因微處理器而異121。

CP451-10

Yokogawa CP451-10 CPU processor module, a small control group consisting of function blocks and input/output will be described in the control chart, the CP451-10 CPU processor module simplifies engineering and maintenance by unifying process equipment control into a control chart. The CP451-10 CPU processor module monitors the entire plant or each process can also be specified as a control chart, rather than specifying individual process units or functions between devices.
CP451-10 CPU Processor module The following describes the characteristics of the control chart
Connecting I/0 and control blocks You can visualize data flow definitions by connecting a line between /0 and function blocks or between function blocks
1, Define the order of control block implementation You can determine the implementation priority or execution order in several functional blocks described in the control chart
2, Mixing of adjustment control and sequence control Adjustment control and sequence control can be mixed in the control chart. The control function can be flexibly configured according to process requirements
3, the free signal flow between the control charts belongs to the function block of different control charts can be connected to another control chart.
Yokogawa CP451-10 CPU Processor module:
Three connections are available between the CP451-10 1/0 module and the field device
CP451-10 CPU Processor Module Dedicated Signal cable connections, pressure terminal connections, and MIL cable connections CP451-10 For dedicated signal cable connections, dedicated signal cables are used to connect field devices via terminal or relay boards. The signal cable interface adapter is structurally integrated with the CP451-10/0 module to prevent the insertion of the wrong type of I/O module by selecting the option code for the /0 module and the signal cable respectively. As for pressure terminal connections, field devices can be connected directly to/modules.
Yokogawa (P451-10/0 module has two types of pressure terminals to choose from one is a single configuration type, the other is a dual configuration type. VO module can realize double redundancy on the terminal block
Customer-supplied MIL cables can be connected directly to the /0 module without the need for terminals. To prevent ML cables from disconnecting from the /0 module, cable connection covers (SCCC01 and SCCC02) can be used with MIL cables.
CP451-10 Yokogawa Yokogawa processor module
CP451-10 Yokogawa processor module is the current control center of the entire CPU, Consisting of instruction Register IRlnstruction Register, instruction Decoder D(nstruction Decoder), operation controller 0COperationcontroler, etc., it is important to keep the whole computer running properly. According to the user’s pre-programmed program, it takes out each instruction from the memory in turn, puts it into the current guest storage IR, determines what operation needs to be performed through instruction decoding (analysis), and then sends a microoperation control signal to the corresponding component by operating the controller OC in accordance with the determined time order. The operation controller OC mainly includes a beat pulse generator, control matrix, clock pulse generator, reset circuit and power off circuit control logic arithmetic
It’s the heart of the computer. You can perform arithmetic operations (including basic operations such as addition and subtraction multipliers and their additional operations) and logical operations (including shifts, logic tests, or ratios of two values). Compared with the control unit, the computer accepts the command of the control unit and performs the action, that is, all the operations performed by the arithmetic unit are commanded by the control signal issued by the control unit, so it is an executive part and a storage unit
These include on-chip caches and register libraries, which are temporary stores of data waiting to be processed or already processed in the CPU. The CPU spends less time accessing memory than it does accessing memory. The use of registers can reduce the number of times the CPU accesses the memory, thereby improving the CPU’s working speed, however, due to the limitations of chip area and integration, the capacity of the register library can not be very large. Register groups can be divided into special registers and general registers. The function of the special memory is fixed, respectively storing the corresponding data, on the other hand, the general register is general purpose, can be specified by the programmer, the number of general registers varies by the microprocessor 121.

CP451-10