基本細節:5464-658 數字速度傳感器模塊 提供準確的速度測量

5464-658是由伍德沃德開發的數字速度傳感器模塊。數字速度傳感器模塊無需額外的信號調理或校準，從而簡化了維護并降低了復雜性。它旨在提供準確的速度測量，而無需使用電位計或需要頻繁的校準調整。這確保了長期的可靠性，并最大限度地減少了速度測量中的潛在誤差或偏差。
速度傳感器輸入
讀取 MPU 和接近探頭輸入，并為應用程序提供速度。如果需要，應用軟件提供導數輸出。Analog Combo 模塊對速度傳感器輸入進行濾波，濾波時間常數可通過應用軟件程序在 8 毫秒或 16 毫秒之間進行選擇。
對于大多數應用程序，8 毫秒就足夠了。對于速度非常慢的應用，可能需要 16 毫秒。模塊將檢測到的最大速度由速度范圍決定。軟件的控制輸出將檢測速度范圍的五十分之一的最小速度。
這樣可以檢測故障的速度傳感器，這有助于防止由于在非常低的速度下更新時間緩慢而導致的超速。
無論速度范圍如何，GAP模塊的監視器輸出都將讀取到0.5 Hz?？山邮艿?MPU 和接近探頭的任意組合，以及速度范圍的任意組合，都可以在應用中使用。無源磁性拾取單元 （MPU） 或接近探頭可用于模塊的四個速度通道中的任何一個。每個速度輸入通道只能接受一個 MPU 或接近探頭。
產品屬性
輸入頻率：0.5 – 25000 Hz
輸入幅度：3.5 – 32 Vdc 輸入到模塊
可用功率：12 Vdc 或 24 Vdc，最大 50 mA
隔離電壓：0 Vrms
分辨率：在選定的頻率范圍內至少 12 位
精度：軟件校準至0.03%滿量程
保險絲：24 Vdc 100 mA 保險絲/通道，12 Vdc 短路保護
時間戳：低事件和低鎖存時分辨率為 5 毫秒

5464-658

The 5464-658 is a digital speed sensor module developed by Woodward. Digital speed sensor modules require no additional signal conditioning or calibration, simplifying maintenance and reducing complexity. It is designed to provide accurate speed measurements without the use of potentiometers or the need for frequent calibration adjustments. This ensures long-term reliability and minimizes potential errors or deviations in speed measurements.
Speed sensor input
reads the MPU and proximity probe inputs and provides speed for the application. Application software provides derivative output if required. The Analog Combo module filters the speed sensor input, and the filtering time constant can be selected between 8 ms or 16 ms by an application software program.
For most applications, 8 milliseconds is sufficient. For very slow applications, it might take 16 milliseconds. The maximum speed that the module will detect is determined by the speed range. The control output of the software will detect a minimum speed of one-fiftieth of the speed range.
This can detect faulty speed sensors, which helps prevent overspeed due to slow update times at very low speeds.
The monitor output of the GAP module will read up to 0.5 Hz regardless of the speed range. Any combination of acceptable MPUs and proximity probes, as well as any combination of speed ranges, can be used in the application. A passive magnetic pickup unit (MPU) or proximity probe can be used in any of the module’s four speed channels. Each speed input channel can only accept one MPU or proximity probe.
Product attribute
Input frequency: 0.5-25000 Hz
Input amplitude: 3.5-32 Vdc input to the module
Available power: 12 Vdc or 24 Vdc, up to 50 mA
Isolation voltage: 0 Vrms
Resolution: at least 12 bits in the selected frequency range
Accuracy: Software calibration to 0.03% full scale
Fuse: 24 Vdc 100 mA fuse/channel, 12 Vdc short circuit protection
Timestamp: 5 ms resolution for low events and low latches

如果您需要查詢或購買，請將產品型號發送到我的電子郵件或直接致電我

銷售經理:何經理

手機: + 86 18005021035

郵箱:?18005021035@163.com

與成都陽光熹禾合作我們提供一流的服務，實現更快的速度，交付多樣化的零件!

1.在24小時內及時回復您

2.交貨時間快

3.最好的服務，合理的價格

4.在生產線上工作多年，有良好的口碑

▲更多相關型號:5464-658 數字速度傳感器模塊 提供準確的速度測量